2022 Updated Verified 300-615 Q&As - Pass Guarantee or Full Refund
[Oct-2022] 300-615 Certification with Actual Questions from Actual4dump
Standard Exam Characteristics
The exam tries to impart validated cognizance on subject matters like networking, computing, automation, and operations. It contains multiple-choice questions, and the allotted time duration is 90 minutes.
The test can only be taken in the English language presently and is available globally via physical centers and an online proctoring facility. Pearson VUE is the Cisco’s partner and administers 300-615 test, so one has to register on their website to sit for it. Also, a fee of $300 is required and should be paid as an exam voucher.
The score you gain comes with a three-year validity. Then, one needs to fulfill the recertification requirements to continue enjoying the benefits of being accredited.
How much Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure Exam Cost
The price of the Cisco 300-615: Troubleshooting Cisco Data Center Infrastructure exam is USD 299, for more information please visit official website because of rates of the courses changes based on countries.
NEW QUESTION 69
Refer to the exhibit.
During implementation of a Cisco UCS C-Series Server, an engineer receives the status that is shown in the exhibit. Which action resolves the issue.
- A. Insert an SD card into SLOT-2
- B. Configure the RAID that is associated with the card.
- C. Set SLOT-1 Sync Mode to "Auto"
- D. Reconfigure the Drive Type from "Removable" to "Non-Removable"
Answer: D
NEW QUESTION 70
Refer to the exhibit.
An engineer is investigating a role mapping issue on a switch. The users report that they cannot view the IP addresses under the tenant "corp". Which action resolves the issue?
- A. Update the UNIX ID.
- B. Add the updated avpair to include/corp/admin/
- C. Add the users to the RADIUS server.
- D. Configure the correct secret password between the APIC and the RADIUS server.
Answer: B
NEW QUESTION 71
Refer to the exhibit.
A certificate is implemented on the security configuration on the Cisco ACI controller. A customer receives a "Connection Not Secure" error in a browser every time the customer logs in to the Cisco APIC GUI. Which action resolves the issue?
- A. Use a browser that supports keys of 2048 bits.
- B. Add a 1536-bit key to the APIC GUI.
- C. Configure a corporate certificate authority for the certificate.
- D. Include a private key with the certificate.
Answer: A
NEW QUESTION 72
Refer to the exhibit.
An engineer is investigating a role mapping issue on a switch. The users report that they cannot view the IP addresses under the tenant "corp". Which action resolves the issue?
- A. Update the UNIX ID.
- B. Add the users to the RADIUS server.
- C. Add the updated avpair to include/corp/admin/
- D. Configure the correct secret password between the APIC and the RADIUS server.
Answer: D
NEW QUESTION 73
Refer to the exhibit.
A network engineer notices packet drops on FCoE traffic from the servers. Which action resolves the issue?
- A. Apply flowcontrol receive on the interface.
- B. Apply flowcontrol transmit on the interface.
- C. Disable priority flow control on the interface.
- D. Enable priority flow control on the interface.
Answer: D
NEW QUESTION 74
An engineer must upgrade all components in a Cisco UCS domain to the same package version, but the upgrade process fails to complete. Which set of Auto Install actions resolves the problem?
- A. Install infrastructure Firmware, then Install Hypervisor Firmware.
- B. Install Infrastructure Firmware, then Install Server Firmware.
- C. Install Server Firmware, then Install Infrastructure Firmware
- D. Install Hypervisor Firmware, then Install Infrastructure Firmware
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/gui/2-5/b_GUI_Firmware_Ma
NEW QUESTION 75
Refer to the exhibit.
The HSRP instance on both switches is showing as active. Which action resolves the issue?
- A. Configure the IP address of N9K-B on the same subnet as N9K-A.
- B. Allow VLAN 100 between the switches.
- C. Configure the HSRP timers to be the same.
- D. Configure preempt on only one of the switches.
Answer: B
NEW QUESTION 76
Refer to the exhibit.
A client reports that the routing protocol neighborship fails to start between two Cisco Nexus switches, N9K-1 and N9K-2. Which action resolves the issue?
- A. Configure a multicast access list to allow the negotiation between N9K-1 and N9K-2
- B. Configure a unicast access list to allow the negotiation between N9K-1 and N9K-2
- C. Add MTU configuration to interface e1/1 on both Cisco Nexus switches
- D. Add OSPF routing configuration to interface e1/1 on both Cisco Nexus switches
Answer: B
NEW QUESTION 77
An engineer must upgrade all components in a Cisco UCS domain to the same package version, but the upgrade process fails to complete. Which set of Auto Install actions resolves the problem?
- A. Install infrastructure Firmware, then Install Hypervisor Firmware.
- B. Install Infrastructure Firmware, then Install Server Firmware.
- C. Install Server Firmware, then Install Infrastructure Firmware
- D. Install Hypervisor Firmware, then Install Infrastructure Firmware
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/gui/2-5/b_GUI_Firmware_Management_25/b_GUI_Firmware_Management_25_chapter_0111.pdf
NEW QUESTION 78 
Refer to the exhibit. A network engineer traces the packet flow from the Veth991 of a blade server toward the core switch. The switch reports performance issues. What is the role of the interface Eth1/7?
- A. IOM network interface
- B. IOM host interface
- C. server interface
- D. fabric interconnect uplink interface
Answer: D
Explanation:
Section: Compute Platforms
NEW QUESTION 79
An IOM fails during a firmware upgrade and is unresponsive. Which action recovers the module?
- A. From the peer IOM, reset the faulty module.
- B. Use AutoInstall to reinstall the firmware.
- C. Restore UCSM configuration from backup.
- D. Roll back to the previous firmware.
Answer: B
NEW QUESTION 80
An engineer enables the packet postcards feature on a Cisco Nexus 9000 Series Switch but receives the error message "Error: Cannot configure postcard when inband-telemetry is configured." Which action resolves the issue?
- A. Disable the software-telemetry feature
- B. Disable the hardware-telemetry feature
- C. Disable the telemetry feature
- D. Disable the inband-telemetry feature
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/progammability/guide/b-cisco-nex
NEW QUESTION 81
Refer to the exhibit.
A network engineer traces the packet flow from the Veth991 of a blade server toward the core switch. The switch reports performance issues What is the role of the interface Eth1/7?
- A. IOM network interface
- B. IOM host interface
- C. server interface
- D. fabric interconnect uplink interface
Answer: D
Explanation:
Explanation
E1/7 is border interface, which is used as uplink. All other veth interfaces are SIF, which stands for Server Interface.
NEW QUESTION 82
Refer to the exhibit.
The EEM script fails to send an SNMP trap when a user attempts to enter configuration mode. Which configuration is missing from the script?
- A. event statement
- B. event-default action statement
- C. IP address of the SNMP server
- D. policy-default action statement
Answer: C
NEW QUESTION 83
Refer to the exhibit.
An OSPF adjacency between Router-A and Router-B cannot reach the FULL state. Which action resolves the issue?
- A. Adjust the MTU on Router-A to 1600.
- B. Disable the check of the MTU value.
- C. Set the OSPF media type to point-to-point.
- D. Adjust the MTU on Router-B to 1604.
Answer: B
NEW QUESTION 84
Refer to the exhibit.
The OTV overlay is deployed in multicast mode. After an unexpected reload of N7K-SITE1-OTV1, the network administrator observed that on N7K-SITE1-OTV2 the OTV site adjacency went into the partial state.
Which
action resolves the issue?
- A. Enable IP IGMP version 3 on the join interface on N7K-SITE1-OTV1.
- B. Configure the Site-Identifier on N7K-SITE1-OTV1 to 0002.0002.0002.
- C. Modify the multicast data-group on N7K-SITE1-OTV1 to match N7K-SITE1-OTV2.
- D. Change the Site-VLAN on N7K-SITE1-OTV2 to VLAN 1.
Answer: A
NEW QUESTION 85
Drag and drop the commands from the left onto the correct categories on the right.
Answer:
Explanation:
NEW QUESTION 86
Refer to the exhibit. A network engineer is configuring the FCoE N_Port virtualization storage area network. After the initial implementation, server 11 fails to connect to the disk array. Which action resolves the issue?
- A. On N9K interface vfc11 and MDS interface vfc 1/1, change switchport mode configuration to F
- B. On MDS interface vfc 1/1, change switchport mode configuration to VF
- C. On N9K interface vfc11 and MDS interface vfc 1/1, change switchport mode configuration to E
- D. On N9K interface vfc11, change switchport mode configuration to NP
Answer: C
NEW QUESTION 87
An engineer is troubleshooting issues in Cisco UCS Director. Drag and drop the possible causes from the left onto the correct issues on the right.
Answer:
Explanation:
NEW QUESTION 88
Refer to the exhibit.
The initiator that has FC ID 0x970102 fails to communicate with the target that has FC ID 0x970200. What action resolves the issue?
- A. Reconfigure the initiator and the target to be in the same zones.
- B. Reset the port for FC ID 0x970102 and FC ID 0x970200 to log in to the fabric.
- C. Reset the port for FC ID 0x970209 and FC ID 0x9700c2 to log in to the fabric.
- D. Reactivate the zoneset.
Answer: A
NEW QUESTION 89
An engineer is troubleshooting issues in Cisco UCS Director. Drag and drop the possible causes from the left onto the correct issues on the right.
Answer:
Explanation:
NEW QUESTION 90
Refer to the exhibit.
The HSRP instance on both switches is showing as active. Which action resolves the issue?
- A. Configure the IP address of N9K-B on the same subnet as N9K-A.
- B. Configure preempt on only one of the switches.
- C. Allow VLAN 100 between the switches.
- D. Configure the HSRP timers to be the same.
Answer: B
NEW QUESTION 91
Refer to the exhibit.
An engineer performs a POST operation using REST API on the Cisco Nexus switch to retrieve a managed object, but the operation fails. Which configuration resolves the issue?
- A. icurl -k -v https://172.16.10.1/api/mo/uni.xml?rsp-subtree=no<fv Tenant name="Test1" />
- B. icurl -k-v https:// 172.16.10.1/api/node/mo/uni/tn-Test1.xml? rsp-subtree=modified=config-only
- C. https://172.16.10.1/api/node/mo/uni/tn-Test1.xml? rsp-subtree=full&rsp-prop-include=config-only
- D. https:/ 172.16.10.1/api/node/mo/uni/tn-Test1.xml? rsp-subtree=modified=config-only
Answer: C
NEW QUESTION 92
A firmware upgrade on a fabric interconnect fails. A bootflash contains a valid image. Drag and drop the recovery steps from the left onto the correct order on the right.
Answer:
Explanation:
NEW QUESTION 93
Refer to the exhibit.
An engineer must save the running configuration to startup-config and generate a syslog message indicating that the configuration was modified, but an error was received. Which action resolves the issue?
- A. Use the extended command copy running-config startup-config.
- B. Change the syslog action number to 1.
- C. Save the configuration using a user with network-admin role.
- D. Add event-default as a second action of the EEM script.
Answer: D
NEW QUESTION 94
......
300-615 Real Valid Brain Dumps With 150 Questions: https://www.actual4dump.com/Cisco/300-615-actualtests-dumps.html
Updated 300-615 Dumps PDF: https://drive.google.com/open?id=1FJ4i4qUS1wnPeoN7rYLB88yvfa4Ax2OG