Best Quality 301 Exam Questions F5 Test To Gain Brilliante Result!
Preparations of 301 Exam 2021 F5 Networks Certification Study Materials Unlimited 49 Questions
NEW QUESTION 24
Given the configuration shown below, if a connection request arrived on the BIG-IP with a source address of 200.10.10.10:1050 and a destination of 150.10.10.75:80, what would the source IP address of the associated packet be when it arrived on the choosen member of the web_pool self
150.10.10.1 { netmask 255.255.255.0 unit I floating enable vlan external allow tcp https } self
10.10.1.1 { netmask 255.255.255.0 unit I floating enable vlan internal allow default } pool web_pool { member 10.10.1.11:80 member 10.10.1.12:80 member
10.10.1.13:80 }snatpool client_pool { member 10.10.1.100 member 150.10.10.15 } virtual VS_web { destination 150.10.10.10:80 ip protocol tcp snat automap pool web_pool }virtual VS_network{ destination 150.10.1 0.0:any mask
255.255.255.0 snatpool client_pool ip protocol tcp pool web_pool } virtual VS_network { destination 150.10.1 0.0:any mask 255.255.255.0 snatpool client_pool ip protocol tcp pool web_pool } virtual VS_network { destination 150.10.10.0:any mask 255.255.255.0 snatpool client_pool ip protocol tcp pool web_pool }
- A. 200.10.10.I0D.200.10.10.10
- B. 150.10.10.15C.150.10.10.15
- C. 10.10.1.I10.10.1.1
- D. 10.10.1.I00B.10.10.1.100
Answer: D
NEW QUESTION 25
When defining a load-balancing pool using the command line, if the load-balancing method is not specified, what is the result
- A. An error would be displayed since no load-balancing method was specified.
- B. The system would prompt the user for a load-balancing method.
- C. The load-balancing method of the previous pool would be used.
- D. The default load-balancing method would be used.
Answer: D
NEW QUESTION 26
What does the nsert XForwarded For?
option in an HTTP profile do?
What does the ?nsert XForwarded For?option in an HTTP profile do?
- A. The client IP addresses are inserted into messages sent to remote syslog servers.
- B. The client IP addresses are inserted into HTTP header.
- C. A BIG-IP self-IP is inserted in the source address field on the server-sid connection.
- D. A BIG-IP self-IP is inserted in the source address field on the clint-side connection.
Answer: B
NEW QUESTION 27
Which are immediate results of entering the following command: b pool PoolA . { lb method predictive member 10.10.1 .1:80 member 10.10.1.2:80 }
- A. No changes will take place since the command is missing the monitor component for PoolA.
- B. Requests sent to this BIG-IP system with a destination port of 80 are load-balanced between the members of Pool
- C. a new pool is available for association with any iRule or virtual server.
- D. The /config/bigip.cinf file is updated to include a definition for the pool named PoolA.
Answer: C
NEW QUESTION 28
A, steaming profile will do which of the following?
- A. Search and replace the first occurrence of a specified of a specified string in either a request or response processed by a virtual server.
- B. Search and replace all occurrences of a specified string only in request processed by a virtual server.
- C. Search and replace all occurrences of a specified string only is responses processed by a virtual server.
- D. Search and replace all occurrences of a specified string in requests and responses processed by a virtual server.
Answer: D
NEW QUESTION 29
Which statement describes advanced shell access correctly?
Which statement describes advanced shell access correctly?
- A. Users with advance shell access have the same right as those with msh access, but the right extend to all partition rather than to Users with advance shell access have the same right as those with msh access, but right extend to all partition rather than to a single partition.
- B. Users with advance shell access are limited to changing, adding, or deleting LTM object in any single partition. Users with? Advance shell accesses are limited to changing, adding, or deleting LTM object on any single partition.
- C. Users with advanced shell access can always change, add, or delete LTM objects in all partition. Users with? Advanced shell access can always, change, add, or delete LTM objects in all partitions.
- D. All Users can be given advanced shell access. All users can be given advance shell access.
Answer: C
NEW QUESTION 30
Which statement describes advanced shell access correctly?
Which statement describes advanced shell access correctly?
- A. The context has no impact on events.
- B. The context determines which pools are available for load balancing.
- C. The context determines which events are available for iRule processing.
- D. The context determines the values of commands that vary between client and server.
Answer: D
NEW QUESTION 31
Which three files/data items are included in a BIG-IP UCS backup file? (Choose three.)
- A. the BIG-IP default traps
- B. the BIG-IP license
- C. the BIG-IP host name
- D. the BIG-IP log files
- E. the BIG-IP administrative addresses
Answer: B,C,E
NEW QUESTION 32
A monitor has been defined with an alias port of 443. All other options are left at their defaults. The administrator
wishes to assign it to a pool of members where the members' ports vary. Which is the result?
- A. This assignment is not allowed since the port do not match.
- B. For each member. If it is running an SSL service at the member port, the monitor may work. Otherwise, the monitor will fail and the member for each member, if it is running an SSL service at the member port, the monitor may work. Otherwise, the monitor will fail and the member will be marked down.
- C. For each member, if the member port is not 443, the member will be marked down. For each member,if the member? Port is not 443, the member will be marked down.
- D. For each member, the monitor will test member node at port 443. For each member, the monitor will test the member ? node at port 443.
Answer: D
NEW QUESTION 33
Which is the result when multiple monitors are assigned to a pool member?
- A. The member is marked available if sufficient monitors succeed, and as unavailable if insufficient monitors succeed.
- B. The member is marked as unavailable if any of the monitors fails.
- C. The member is marked as available if any of the monitors succeed.
- D. The member is marked available if all monitors succeed, and as marginal if one or more monitors fail(s).
Answer: A
NEW QUESTION 34
How is traffic flow through transparent virtual servers different from typical virtual servers?
- A. Traffic flow through transparent virtual severs is not load balabced.
- B. traffic flow through transparent virtual servers must be forwarded through a single routing device.
- C. Traffic flow through transparent virtual servers is bridged ( leave IP and MAC.addresses intact) rather than routed (leave IP address intact but change the MAC.addresses).
- D. traffic flow through transparent virtual servers soes not have IP address translation performed.
Answer: D
NEW QUESTION 35
Why would an administrator capture monitor traffic between a BIG-IP and servers?
- A. Viewing monitor traffic could help the administrator to define a more robust monitor.
- B. If client traffic to servers was failing, viewing and analyzing monitor traffic would determine the reason.
- C. Only client traffic may be captured; monitor traffic may not be captured.
- D. If a client were having difficulty logging into a load-balanced SSH server, viewing and analyzing the connection process would determine the reason.
Answer: A
NEW QUESTION 36
A BIG-IP has two SNATs, a pool of DNS servers and a virtual server configured to load-balance UDP traffic to the DNS servers. One SNAT's address is 64.100.130.10; this SNAT is defined for all addresses.
The second SNAT's address is 64.100.130.20; this SNAT is
defined for three specific addresses, 172.16.3.54, 172.16.3.55, and 172.16.3.56. The virtual server's destination is
64.100.130.30:53.
The SNATs and virtual server have default VLAN associations. If a client with IP address 172.16.3.55 initiates a request to the virtual server, what is the source IP address of the packet as it reaches the chosen DNS server?
- A. 172.16.3.55
- B. 64.100.130.20
- C. 64.100.130.30
- D. 64.100.130.10
Answer: B
NEW QUESTION 37
Which tool is used on BIG-IP systems to capture data packets?
- A. qkview
- B. tcpdump
- C. ethereal
- D. snoop
Answer: B
NEW QUESTION 38
A site wishes to use an external monitor. Other than what is coded in the monitor script, what information must be configured on the BIG-IP for the monitor to be functional? (Choose two.)
- A. BIG-IP must know the name of the program.
- B. BIG-IP services that are running on the system to be tested.
- C. BIG-IP the IP addresses of the devices that will be tested. Must know which
- D. BIG-IP must know which function the program is going to test. Must know
- E. BIG-IP node or member the result are to be applied to. Must know all
Answer: A,E
NEW QUESTION 39
What occurs when a load?command is issued?What occurs when a ? load?command is issued?
- A. the running configuration is replaced by the configuration in the files, but only if they are syntactically correct.
- B. The running configuration is replaced by the any portion of the configuration files that are syntactically correct.
- C. The running configuration is compared to the configuration in files and, when changes are noted, the version in the files is loaded over what is in money.
- D. The running configuration is loaded into files for storage.
Answer: A
NEW QUESTION 40
What occurs when a load?command is issued?What occurs when a ? load?command is issued?
- A. rootbigipsystem[Active][tmos.Itm.pool]#create pooh members add {172.16.20.1:80{priority- group 2}}
- B. rootbigipsystem[Active][tmos.Itm.pool]#create pooh members add {172.16.20.1:80{} }
- C. rootbigipsystem[Active][tmos.Itm.pool]#create pooh members add {170.16.20.1:80}
- D. rootbigipsystem[Active][tmos.Itm.pool]#create pooh members add {172.16.20.1:80}
Answer: C
NEW QUESTION 41
A monitor has been defined using the HTTP monitor template. The send and receive strings were customized, but all other settings were left at their defaults. Which resources can the monitor be assigned to?
- A. most pools
- B. most virtual severs
- C. most nodes
- D. only specific pool members
Answer: A
NEW QUESTION 42
......
Focus on 301 All-in-One Exam Guide For Quick Preparation: https://www.actual4dump.com/F5/301-actualtests-dumps.html