[Dec 01, 2021] Pass 500-220 Review Guide, Reliable 500-220 Test Engine [Q15-Q36]

[Dec 01, 2021] Pass 500-220 Review Guide, Reliable 500-220 Test Engine

500-220 Test Engine Practice Test Questions, Exam Dumps

Cisco 500-220 Exam Syllabus Topics:

Topic	Details
Topic 1	Sentry for Meraki managed deployments Design scalable Meraki Auto VPN architectures
Topic 2	Design stable, secure, and scalable routing deployments Explain Cisco Meraki cloud architecture
Topic 3	SSIDs for Enterprise and BYOD deployments Cisco Meraki Cloud Management
Topic 4	Design Enterprise wireless services Configuring MR wireless access points
Topic 5	Redundant networks and high availability Explain deployment consideration for the vMX
Topic 6	Troubleshooting Enterprise networks Compare deployment workflows
Topic 7	Threat protection and content filtering rules Explain access methods to dashboard and devices
Topic 8	Explain organizational structure, segmentation and permissions Explain licensing, co-termination, and renewals

 

NEW QUESTION 15
What are two organization permission types? (Choose two.)

• A. Full
• B. Read-only
• C. Write-only
• D. Monitor-only
• E. Write

Answer: A,B

Explanation:
Reference:
Managing_Dashboard_Administrators_and_Permissions

 

NEW QUESTION 16
Refer to the exhibit.

Which outcome occurs when logging is set to Enabled?

• A. The hits counter within this section is now enabled.
• B. Outbound flows are sent to a configured syslog server if a syslog sender is configured for flows.
• C. This firewall rule is now enabled.
• D. Inbound flows are sent to a configured syslog server if a syslog server configured for flows.

Answer: D

 

NEW QUESTION 17
Refer to the exhibit.

Which design recommendation should be considered?

• A. A 50-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 2-hop maximum.
• B. A 50-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 1-hop maximum.
• C. A 25-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 1-hop maximum.
• D. A 25-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 2-hop maximum.

Answer: C

 

NEW QUESTION 18
What is the role of the Meraki Dashboard as the service provider when using SAML for single sign-on to the Dashboard?

• A. The Dashboard generates the SAML request.
• B. The Dashboard generates the SAML response.
• C. The Dashboard provides user access credentials.
• D. The Dashboard parses the SAML request and authenticates users.

Answer: A

 

NEW QUESTION 19
Refer to the exhibit.

Which IDS/IPS mode is the MX Security Appliance configured for?

• A. quarantine
• B. blocking
• C. prevention
• D. detection

Answer: C

 

NEW QUESTION 20
Air Marshal has contained a malicious SSID.
What are two effects on connectivity? (Choose two.)

• A. Currently associated clients are affected by restrictive traffic shaping rules.
• B. New clients cannot connect.
• C. Currently associated clients stay connected.
• D. Currently associated clients are disconnected.
• E. New clients can connect.

Answer: B,D

 

NEW QUESTION 21
What are two ways peers interact with ports that Auto VPN uses? (Choose two.)

• A. Peers contact the VPN registry at TCP port 9350.
• B. For IPsec tunneling, peers use high UDP ports within the 32768 to 61000 range.
• C. For IPsec tunneling, peers use UDP ports 500 and 4500.
• D. Peers contact the VPN registry at UDP port 9350.
• E. For IPsec tunneling, peers use high TCP ports within the 32768 to 61000 range.

Answer: D,E

Explanation:
Reference:
_Configuration_and_Troubleshooting

 

NEW QUESTION 22
What is the best practice Systems Manager enrollment method when deploying corporate-owned iOS devices?

• A. manual
• B. Sentry enrollment
• C. Apple Configurator
• D. DEP

Answer: C

 

NEW QUESTION 23
Which two Systems Manager Live tools are available only for Apple Macs and Windows PCs and cannot be used on iOS or Android mobile devices? (Choose two.)

• A. Remote Desktop
• B. Send notification
• C. Selective wipe
• D. OS updates
• E. Screenshot

Answer: A,C

 

NEW QUESTION 24
Which configuration step is necessary when automatic updating is required of iOS apps provisioned through Systems Manager that are found in the App Store?

• A. No configuration step is necessary; automatic updating is the default behavior.
• B. Create a security policy that enables automatic updates.
• C. Create a profile with automatic update enabled and apply it to iOS devices.
• D. Configure automatic updating of iOS devices in the Meraki installed profile.

Answer: B

 

NEW QUESTION 25
One thousand concurrent users stream video to their laptops. A 30/70 split between 2.4 GHz and 5 GHz is used.
Based on client count, how many APs (rounded to the nearest whole number) are needed?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: D

 

NEW QUESTION 26
Which requirement is needed to implement Fast Lane on Cisco Meraki APs?

• A. wireless profile installed on a Cisco iOS access point
• B. adaptive 802.11r disabled
• C. traffic shaping rule tagging traffic with a DSCP value of 46 to Apple.com
• D. wireless profile installed on an Apple iOS device

Answer: D

Explanation:
Reference:
Wireless_QoS_and_Fast_Lane

 

NEW QUESTION 27
A Cisco Meraki MV camera is monitoring an office and its field of vision currently captures work desks and employee computer screens. However, recording employee computer screens is prohibited by local regulation.
Which feature in Dashboard can be used to preserve the current position of the camera while also meeting regulation requirements?

• A. zone exclusion
• B. privacy window
• C. restricted mode
• D. sensor crop
• E. area or interest

Answer: C

 

NEW QUESTION 28
In an organization that uses the Co-Termination licensing model, which two operations enable licenses to be applied? (Choose two.)

• A. Call Meraki support.
• B. Wait for the devices to auto-renew.
• C. License a network.
• D. Renew the Dashboard license.
• E. License more devices.

Answer: D,E

Explanation:
Reference:
Termination_Licensing_Overview

 

NEW QUESTION 29
Refer to the exhibit.

Which two actions are required to optimize load balancing asymmetrically with a 4:1 ratio between links? (Choose two.)

• A. Change the assigned speeds of WAN 1 and WAN 2 so that the ratio is 4:1.
• B. Enable load balancing.
• C. Change the primary uplink to "none".
• D. Set the speed of the cellular uplink to zero.
• E. Add an internet traffic preference that defines the load-balancing ratio as 4:1.

Answer: B,E

 

NEW QUESTION 30
Which type of authentication protocol is used when using OSPF on an MX appliance?

• A. MD5
• B. plaintext
• C. certificate
• D. SHA-1

Answer: A

Explanation:
Reference:
Using_OSPF_to_Advertise_Remote_VPN_Subnets

 

NEW QUESTION 31
Refer to the exhibit.

What are the Loss and Average Latency statistics based on?

• A. responses that the MX appliance receives on the connectivity-testing IP addresses on the Security & SD- WAN > Firewall page
• B. responses that the MX appliance receives on the connectivity-testing hostnames on the Insight > Web App Health page
• C. responses that the MX appliance receives on the connectivity-testing IP address that is configured on the Security & SD-WAN > SD-WAN & Traffic Shaping page
• D. responses that the MX appliance receives on the connectivity-testing IP addresses on the Help > Firewall info page

Answer: A

 

NEW QUESTION 32
When wireless SSIDs are configured in Dashboard, which setting on the Access Control page affects the ability of a 2.4 GHz only client device from associating to the WLAN for the first time?

• A. Dual band operating with Band Steering
• B. 802.11r
• C. Content filtering
• D. Bridge mode

Answer: A

 

NEW QUESTION 33
Which information is used to calculate whether a WAN link has high usage?

• A. total number of devices that are actively passing traffic
• B. total historical throughput of an uplink
• C. data under Security & SD WAN > Appliance Status > Uplink > Live Data
• D. value under Security & SD WAN > SD WAN & Traffic Shaping > Uplink Configuration

Answer: D

 

NEW QUESTION 34
Which three verbs of request are available in the Cisco Meraki API? (Choose three.)

• A. PATCH
• B. POST
• C. GET
• D. PUT
• E. ADD
• F. SET

Answer: B,C,D

Explanation:
Reference:
Cisco_Meraki_Dashboard_API

 

NEW QUESTION 35
What are two roles of the network and device tags in a Dashboard? (Choose two.)

• A. Network tags can be used to assign networks to separate Auto VPN domains in an Organization with many networks.
• B. Device tags can be assigned to MR APs to influence the gateway selection for repeaters in a mesh wireless network.
• C. Device tags can be used to simplify the assignment of device-level permissions in an Organization with many administrators.
• D. Tags enable administrators to configure a combination of network and device specific tags to create summary reports filtered for specific devices across multiple networks.
• E. Network tags can be used to simplify the assignment of network-level permissions in an Organization with many networks.

Answer: B,D

Explanation:
Reference:
Organization_Menu/Manage_Tags

 

NEW QUESTION 36
......

100% Free 500-220 Daily Practice Exam With 58 Questions: https://www.actual4dump.com/Cisco/500-220-actualtests-dumps.html

500-220 exam torrent Cisco study guide: https://drive.google.com/open?id=1QdUICtNYDGnBs0XFbNzIkuO48RtGAEGc