[Dec-2021] Exam NS0-175: New Brain Dump Professional - Actual4dump
Free NS0-175 Exam Dumps to Improve Exam Score
NEW QUESTION 87
The FlexPod Data Center with VMware vSphere 5.1 solution utilizes vSphere High Availability (HA).
What is a benefit of the vSphere HA feature?
- A. Continuous availability for applications in the event of server failures by creating a live shadow instance of a virtual machine that is always up to date with the primary virtual machine.
- B. Allocate and balance computing capacity dynamically
- C. Ensuring zero downtime for all applications
- D. Automated restart of virtual machines on other available servers in the case of primary server failure
Answer: D
NEW QUESTION 88
The best place to find information regarding a log header, such as x-cs-headerlength, is the _____.
- A. Deployment Guide
- B. Administration Guide
- C. Guide to Caching Protocols and Services
- D. Guide to Messages and Logfile Entries
Answer: D
NEW QUESTION 89
A customer wants to monitor and analyze workloads for all of their NetApp ONTAP clusters including the storage system from their FlexPod environment.
In this scenario, which two tools would satisfy this requirement? (Choose two.)
- A. Cisco Data Center Network Manager
- B. NetApp ONTAP System Manager
- C. NetApp Active IQ Digital Advisor
- D. NetApp Active IQ Unified Manager
Answer: C,D
NEW QUESTION 90
A customer is designing a FlexPod environment and is preparing for an ESXI host installation. High availability is a requirement for the FlexPod design. The ESXI servers will be built with new iSCSI boot LUNs.
Which two NetApp design components are required for this task? (Choose two.)
- A. boot LUN name
- B. iSCSI LIF IP addresses
- C. boot LUN UUID
- D. SVM target IQN
Answer: B,C
NEW QUESTION 91
When configuring a volume to contain a LUN, which administrative tool automatically applies NetApp recommendations?
- A. VMware vSphere
- B. Microsoft SystemCenter
- C. Data ONTAP command-line interface
- D. OnCommand System Manager
Answer: D
NEW QUESTION 92
Refer to the exhibit.
What would be the correct configuration for the ports labeled?
- A. int eth1/31channel-group 15 mode activeint eth 1/32channel-group 15 mode activeint po15switchport mode trunkswitchport trunk allowed vsan 45spanning-tree port type edge trunkvsan databasevsan 45 interface po15
- B. vlan 35fcoe vsan 45int eth1/31-32channel-group 15 mode activeint po15switchport mode trunkswitchport trunk allowed vlan 35switchport trunk allowed vsan 45spanning-tree port type edge trunkvsan databasevsan 45 interface po15
- C. vlan 35fcoe vsan 35int eth1/31channel-group 15 mode activeint eth 1/32channel-group 15 mode activeint portchannel15switchport mode trunkswitchport trunk allowed vlan 35spanning-tree port type edge trunkint vfc15bind interface po15switchport trunk allowed vsan 35vsan databasevsan 35 interface vfc15
- D. int eth1/31-32channel-group 15 mode activeint po15switchport mode access vsan 45vsan databasevsan 45 interface po15
- E. vlan 35fcoe vsan 45int eth1/31-32channel-group 15 mode activeint po15switchport access vlan 35int vfc15bind interface po15switchport trunk allowed vsan 45vsan databasevsan 45 interface vfc15
Answer: C
NEW QUESTION 93
To open a Network Appliance support ticket, you must access ____ at the NOW site.
- A. Submit a support ticket
- B. Submit a Case
- C. Submit a BURT
- D. Submit a RMA
Answer: B
NEW QUESTION 94
You are configuring a UCS host for an iSCSI SAN boot. In this scenario, which storage variable must be recorded for boot policy creation?
- A. mode WWPN
- B. node IQN
- C. SVM IQN
- D. cluster WWN
Answer: B
NEW QUESTION 95
A customer with a FlexPod Express solution wants to enable remote access to the NetApp storage component.
In this scenario, which two access methods are recommended? (Choose two.)
- A. RDP
- B. Telnet
- C. SSH
- D. SAML
Answer: B,C
NEW QUESTION 96
How can the Network Appliance field alerts be received?
- A. may be received via email
- B. replace autosupport
- C. are available at "now.netapp.com"
- D. are available at "www.netapp.com"
Answer: A,C
NEW QUESTION 97
Click the Exhibit button.
Referring to the exhibit, how many ports are currently configured for connectivity using FCoE?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 98
Which of the following must you successfully specify when configuring the NTLM authentication?
- A. None of the above
- B. UNIX computer to use
- C. Windows domain controller to use
- D. RADIUS server
Answer: C
NEW QUESTION 99
Which of the following tools is designed to inventory existing VMware vSphere, Linux, and Microsoft Windows Server versions in a customer environment?
- A. Cisco UCS Central
- B. Cisco UCS Sizer for Enterprise Applications
- C. Microsoft Assessment and Planning (MAP) Toolkit
- D. Cisco Resource Comparison Tool
Answer: C
NEW QUESTION 100
You want to use Cisco UCS Manager on the Fabric Interconnects to manage attached C-Series servers.
Which two connection topologies would satisfy the requirements? (Choose two.)
- A. Servers directly connected to the Fabric Interconnects
- B. Fabric Interconnects uplinked to MDS switches
- C. Fabric Interconnects uplinked to Fabric Extenders
- D. Fabric Interconnects uplinked to Nexus switches
Answer: A,B
NEW QUESTION 101
Which of the following options log only reports displays Web request data?
- A. Web Server Acceleration
- B. Web Access
- C. Messages
- D. Web Details
Answer: D
NEW QUESTION 102
A customer has reviewed the latest vSphere CVD and asks you if they can use their older Cisco servers in the new FlexPod solution and still have supported configuration.
Which statement is true in this scenario?
- A. FlexPod configurations are fully supported if they follow a specific NetApp Verified Architecture.
- B. FlexPod configurations are fully supported regardless of the equipment used.
- C. FlexPod configurations are fully supported if they follow a specific Cisco Validated Design.
- D. FlexPod configurations are fully supported if they follow the technical specifications and compatibility matrices.
Answer: C
NEW QUESTION 103
......
Network Appliance NS0-175 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
Powerful NS0-175 PDF Dumps for NS0-175 Questions: https://www.actual4dump.com/NetworkAppliance/NS0-175-actualtests-dumps.html