FCP_FWF_AD-7.4 Practice Dumps - Verified By Actual4dump Updated 169 Questions
Updated FCP_FWF_AD-7.4 Exam Dumps - PDF Questions and Testing Engine
Fortinet FCP_FWF_AD-7.4 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 50
What steps can be taken to troubleshoot common wireless connectivity issues?
(Select all that apply)
Response:
- A. Verify VLAN assignments
- B. Review AP-to-controller connection status
- C. Increase AP transmit power
- D. Check DHCP server operation
Answer: A,B,D
NEW QUESTION # 51
Which actions can be taken to provision and manage FortiAP devices using the FortiGate wireless controller?
(Select all that apply)
Response:
- A. Implement VLAN load-balancing
- B. Create and apply FortiAP profiles
- C. Enable SSID hiding
- D. Configure advanced wireless settings
Answer: A,B,D
NEW QUESTION # 52
What is the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration?
Response:
- A. DHCP
- B. Broadcast
- C. Static
- D. Multicast
Answer: C
NEW QUESTION # 53
Which modulation scheme offers extremely high throughput (EHT) in 802.11be technology?
Response:
- A. Binary phase-shift keying
- B. Orthogonal frequency division multiplexing
- C. Direct sequence spread spectrum
- D. Quadrature amplitude modulation
Answer: D
NEW QUESTION # 54
Two APs are located in a shop that is required to support forty 2.4 GHz point-of-sale wireless devices. The APs are managed by a centrally hosted FortiGate. A previous wireless network administrator has enabled client load balancing between APs.
However, the clients are not balancing well between the APs, causing overloading on one of the AP radios. Refer to the exhibit, which is part of the configuration of the AP profile that is used for the APs.
The first AP has 35 clients associated with it, the second has five clients associated with it. The detected noise floor of the network is -91dBm. The channel utilization for both 2.4 GHZ interfaces is less than 40%. The clients have a detected signal strength of between -53 and -71 dBm. Which configuration change would improve the distribution of wireless clients between the APs? Response:
- A. Set the max-clients option to 20.
- B. Manually configure 2.4GHz interfaces of both APs to separate channels.
- C. Increase the handoff-sta-thresh option to 20.
- D. Decrease the handoff-rssi option to 20.
Answer: D
NEW QUESTION # 55
Which two statements about background rogue scanning are correct?
(Choose two.)
Response:
- A. When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP
- B. Background rogue scanning requires DARRP to be enabled on the AP instance
- C. A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band
- D. A dedicated radio configured for background scanning can support the connection of wireless clients
Answer: B,D
NEW QUESTION # 56
Which two statements about distributed automatic radio resource provisioning (DARRP) are correct?
(Choose two.)
Response:
- A. DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.
- B. DARRP measurements can be scheduled to occur at specific times.
- C. DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.
- D. DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.
Answer: B,D
NEW QUESTION # 57
Channel utilization is a primary indicator of the bandwidth used and remaining in a wireless channel. Which other factors or issues can cause high channel utilization?
(Choose three.)
Response:
- A. Large numbers of wireless clients connected to your own APs.
- B. Neighbouring sources of wireless interference, such as a microwave.
- C. Large numbers of wireless clients connected to a neighboring AP on the same channel.
- D. Wireless clients using applications that require high bandwidth.
- E. Large numbers of wireless clients connected to a neighboring AP on a different channel.
Answer: A,C,D
NEW QUESTION # 58
When deploying a wireless network that is authenticated using EAP PEAP, which two configurations are required?
(Choose two.)
Response:
- A. A WPA2 or WPA3 Enterprise wireless network
- B. An X.509 to authenticate the authentication server
- C. A WPA2 or WPA3 personal wireless network
- D. An X.509 certificate to authenticate the client
Answer: A,B
NEW QUESTION # 59
In a scenario where rapid deployment of multiple FortiAP devices across different locations is required, which tool is the most suitable?
Response:
- A. FortiPresence
- B. FortiAP Cloud
- C. FortiGate integrated wireless controller
- D. FortiPlanner
Answer: B
NEW QUESTION # 60
What factors should be considered when troubleshooting FortiGuard issues?
(Select all that apply)
Response:
- A. Time synchronization between FortiGate and NTP servers
- B. Active FortiGuard subscription status
- C. Firewall rules that may block FortiGuard updates
- D. DNS resolution for FortiGuard servers
Answer: B,C,D
NEW QUESTION # 61
When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds?
(Choose two.)
Response:
- A. When the AP detects any interference from a trusted neighboring AP stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- B. When the AP detects any wireless client signal weaker than -70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.
- C. When the AP detects any other wireless signal stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- D. When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger that -70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.
Answer: A,C
NEW QUESTION # 62
Which features can be utilized for improved client distribution and efficient bandwidth usage?
Response:
- A. FortiGate guest management
- B. FortiAP load balancing
- C. Advanced bridge mode options
- D. VLAN load-balancing
Answer: B,D
NEW QUESTION # 63
Which option is used to configure connection rules between the wireless and wired network on a FortiAP device?
Response:
- A. FortiGate guest management
- B. Advanced bridge mode options
- C. FortiAP load balancing
- D. VLAN configurations
Answer: B
NEW QUESTION # 64
What would be a primary concern if rogue APs are not monitored and suppressed in a network?
Response:
- A. Inability to detect other rogue APs in the future.
- B. Decreased Wi-Fi signal strength.
- C. Unauthorized access and potential data breaches.
- D. Reduced number of available IP addresses.
Answer: C
NEW QUESTION # 65
Refer to the exhibit.
A new security policy is made by the IT department to prevent direct communication between wireless stations There is one SSID configured in bridge mode Which statement is correct as a plan of action to update the wireless network configuration?
- A. Create unique SSIDs for each FortiAP device
- B. Add an upstream layer 3 device on each FortiAP device
- C. Drop all local traffic in the wireless network
- D. Block intra-SSID traffic on the wireless network
Answer: D
NEW QUESTION # 66
VLAN load-balancing features mainly aim to:
Response:
- A. Evenly distribute network traffic across VLANs.
- B. Configure advanced bridge modes.
- C. Set up guest accounts for visitors.
- D. Strengthen wireless signals.
Answer: A
NEW QUESTION # 67
Which tools can assist in troubleshooting wireless network issues on FortiGate?
(Select all that apply)
Response:
- A. Encryption key generator
- B. DHCP lease tracker
- C. Packet capture analyzer
- D. RF spectrum analyzer
Answer: C,D
NEW QUESTION # 68
Refer to the exhibit.
What does the red line represent?
- A. A pool of channels for the wireless radio to broadcast the wireless signal.
- B. The total length of the wireless signal wavelength
- C. Practical channel bonding to increase high throughput
- D. The range of channels used to allocate available airtime while transmitting data
Answer: C
NEW QUESTION # 69
What is the primary purpose of scanning the environment for rogue APs?
Response:
- A. To upgrade the firmware of existing access points.
- B. To enhance the Wi-Fi signal strength.
- C. To identify unauthorized or malicious wireless access points.
- D. To monitor network traffic on authorized APs.
Answer: C
NEW QUESTION # 70
Which two roles does FortiPresence analytics assist in generating presence reports?
(Choose two.)
Response:
- A. Gathering details about on site visitors
- B. Reporting potential threats by guests on site
- C. Comparing current data with historical records
- D. Predicting the number of guest users visiting on-site
Answer: A,C
NEW QUESTION # 71
For wireless networks configuration, which tools can be used?
Response:
- A. FortiPresence
- B. FortiGate integrated wireless controller
- C. FortiAP Cloud
- D. FortiPlanner
Answer: B,C
NEW QUESTION # 72
......
New (2025) Fortinet FCP_FWF_AD-7.4 Exam Dumps: https://www.actual4dump.com/Fortinet/FCP_FWF_AD-7.4-actualtests-dumps.html
Best Way To Study For Fortinet FCP_FWF_AD-7.4 Exam Brilliant FCP_FWF_AD-7.4 Exam Questions PDF: https://drive.google.com/open?id=1_Lkaia87PRAl-pV9BQxdQef27ZAOVa0i