Free MB-320 Sample Questions and 100% Cover Real Exam Questions (Updated 208 Questions)
Download Real Microsoft MB-320 Exam Dumps Test Engine Exam Questions
The Microsoft Dynamics 365 Supply Chain Management, Manufacturing certification exam is ideal for professionals who work with Dynamics 365 Supply Chain Management, Manufacturing, including consultants, developers, and solution architects. It is also helpful for professionals who want to enhance their knowledge and skills in manufacturing processes and gain a competitive edge in the job market. Passing the MB-320 certification exam demonstrates that the candidates have the necessary skills and knowledge to implement and configure manufacturing processes using Microsoft Dynamics 365 Supply Chain Management.
Introduction to Microsoft MB-320: Microsoft Dynamics 365 Supply Chain Management, Manufacturing Exam
Candidates for MB-320 exam dumps are seeking to understand fundamental concepts of Microsoft dynamics knowledge and skills. Before taking this exam, exam aspirants ought to have a solid fundamental information of the concepts shared in the preparation guide.
It is suggested that professionals are accustomed to the ideas and the technologies represented here by taking relevant training courses. Candidates are expected to have some hands-on experience with configure geocoding, defining tax codes, configuring service and product pricing, managing work orders, managing incidents, configuring service task types, implementing schedule board. After passing this exam, candidates get a certificate from Microsoft that helps them to demonstrate their proficiency in dynamics concepts.
NEW QUESTION # 37
You are the product design manager for a computer manufacturer.
Your new laptop model is configurable. There are restrictions on which hardware components can be selected depending on the model. You create configuration groups for hardware and software.
You need to create a new laptop item number and configurations.
In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - Create a product master with dimention-based configuration technology
2 - Assign a producct dimension with an....
3 - Create a bill of materials version and....
4 - Create the configuration variants automatically
Reference:
https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/pim/dimension-based-product-configuration
NEW QUESTION # 38
A company produces light projection toys for holiday decorations. The company plans to implement Lean manufacturing processes.
Production master data must meet the following requirements:
Visual templates for a holiday must only be included for in-store products where that holiday is celebrated Visual templates for a holiday must only be included for in-store products based upon that season Online customers must be able to order visual templates for any holiday or region.
You need to implement production master data.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 39
You need to configure the system to track the cost and delivery performance of VendorZ.
Which two actions should you perform? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
- A. Add an activity to the production route for deliveries.
- B. Add an activity to the production flow for deliveries.
- C. Create a service product and set Stocked product = No.
- D. Create a service product and set Stocked product - Yes.
Answer: A,D
NEW QUESTION # 40
A beverage company uses Dynamics 365 Supply Chain Management batch processing for production.
You need to identify the ingredient type used in batch processing when the base attribute of a product is added to a formula line.
What is the ingredient type?
- A. filler
- B. none
- C. compensating
- D. active
Answer: D
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/batch-balancing
NEW QUESTION # 41
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A manufacturing plant uses Lean processes. You plan to outsource a painting operation to a subcontracting vendor. You create a service item named SP-01 to represent the painting service.
You need to create a subcontracting activity for the painting service.
Solution:
* Create a vendor resource and work cell for outsourced painting; add the vendor resource to the work cell.
* Create a production flow process activity using the painting work cell and the service item for picking.
* When the service is required, create a purchase order to the subcontracting vendor and add a line for the service item and the vendor price.
Does the solution meet the goal?
- A. No
- B. Yes
Answer: B
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/production-control/activity-based
NEW QUESTION # 42
You are the production supervisor at a manufacturing company. You are in the process of configuring the production control module and its parameters.
A company plans to use manufacturing execution. Bill of materials (BOM) item consumption must be generated when items are reported at the operation level.
You need to configure the Manufacturing execution production order defaults form to allow for back flushing on operations.
How should you set up Automatic BOM consumption? To answer, drag the appropriate setting to the correct targets. Each source may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/production-control/production-pa
NEW QUESTION # 43
A company manufactures high-end speaker systems. You have different configurations available for customers to customize features including finishes and speaker materials. You have a product configuration model with bill of material lines and conditions for each component.
A customer can optionally add on protective covers, but only if a non-metal material is selected. If any other material is selected, the covers cannot be added. You add the following attributes:
You need to create an expression-based constraint that will only allow Corner Protection if Metal is not selected.
How should you complete the expression? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION # 44
You are the production supervisor at a manufacturing company. You are in the process of configuring the production control module and its parameters.
A company plans to use manufacturing execution. Bill of materials (BOM) item consumption must be generated when items are reported at the operation level.
You need to configure the Manufacturing execution production order defaults form to allow for back flushing on operations.
How should you set up Automatic BOM consumption? To answer, drag the appropriate setting to the correct targets. Each source may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/production-control/production-pa
NEW QUESTION # 45
You are a manufacturing consultant helping a client test out different bill of material (BOM) and route consumption options when starting production orders. Material and labor consumption are to be completed before Report as finish.
You are running a production order with BOM lines that have a Flushing principle set to Start. The Automatic Route Consumption Runtime has been set to Yes.
You have set up the default Start user options for all production orders as shown in the exhibit below.
Answer:
Explanation:
Explanation
NEW QUESTION # 46
A customer produces light projection toys for holiday decorations throughout the year. The production process creates the projections toy at the following work cells stands, main assembly, electric, visuals, and packaging.
Vendors must create visual templates for the company for each season. They must manage the transfer of visual templates to the warehouse. Each transfer for each vendor must use the same purchase agreement.
You need to configure the subcontracted transfer activity.
What should you do?
- A. Set the transfer Freighted by value to Carrier. Ensure that purchase agreements include the vendor ID of the vendor.
- B. Set the transfer activity Freighted by value to Shipper. Ensure that purchase agreements include the vendor ID of the warehouse.
- C. Set the transfer Freighted by value to Shipper. Ensure that purchase agreements include the vendor ID of the vendor.
- D. Set the transfer activity Freighted by value to Recipient. Ensure that purchase agreements include the vendor ID of the vendor.
- E. Set the transfer activity Freighted by value to Carrier. Ensure that purchase agreements include the vendor ID of the warehouse.
- F. Set the transfer activity Freighted by value to Recipient. Ensure that purchase agreements include the vendor ID of the warehouse.
Answer: F
Explanation:
Section: Create, process, and manage production batch orders
Explanation/Reference:
References:
https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/production-control/activity- based-subcontracting#subcontracted-transfer-activities
NEW QUESTION # 47
A company implements Dynamics 365 for Finance and Operations.
Production orders are generated for products directly from projects. You create the following production order:
Use the drop-down menus to select the answer choice that answers each question based on the information presented in the graphic. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 48
A company produces homeopathic lotions for pain relief and uses Dynamics 365 for Finance and Operations.
Several components used in the production of the pain-relieving lotion and oils have special government-mandated reporting requirements.
You need to ensure the company can provide the appropriate reporting and tracking for these components.
Which parameters should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION # 49
A company produces lotions for pain relief and uses Dynamics 365 for Finance and Operations.
You have been provided the following information for a new relieving lotion.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 50
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
A company implements Dynamics 365 for Finance and Operations for their Lean manufacturing environment.
There has been an engineering change to a fixed quantity product that is in production. This change will add an additional processing step as the second step. The existing version must be phased out and replaced by the new version.
You need to ensure that the engineering change takes affect at the end of the month.
Solution:
* Create an activity for the new process step and add it to the existing production flow. Set the expiration date to the end of the month.
* Create a Kanban rule that incorporates the new activity with an effective date of end of the month.
* Edit the existing Kanban rule. Set the expiration date to the end of the month.
* Activate the new production flow.
Does the solution meet the goal?
- A. Yes
- B. No
Answer: B
NEW QUESTION # 51
You are the product manager at a distribution company. You are responsible for managing product compliance standards and reporting.
Chemical product, C00D1 can be sold in all parts of the United States except for the state of California.
You need to set up these compliance requirements for C0001.
Which four actions should be performed in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation
Reference:
https://docs.microsoft.com/en-us/dynamicsax-2012//restricted-products-item-by-country-or-state-form?redirected
NEW QUESTION # 52
You are the production scheduler at a manufacturing company. You schedule estimated production orders and ensure that capacity is used efficiently.
You have an order that must be scheduled at the resource group level and scheduled backward from the delivery date specified on the production order.
You need to schedule the order.
Which scheduling parameters should you use? To answer, select the appropriate option in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/production-control/operation-sch
NEW QUESTION # 53
......
New MB-320 exam dumps Use Updated Microsoft Exam: https://www.actual4dump.com/Microsoft/MB-320-actualtests-dumps.html
Verified MB-320 Dumps Q&As - MB-320 Test Engine with Correct Answers: https://drive.google.com/open?id=1is03qPLB86deV-xk9bJb6W1gOSuJpqqb