Get 2025 Most Reliable Nutanix NCP-MCI-6.5 Training Materials [Q16-Q40]

Get 2025 Most Reliable Nutanix NCP-MCI-6.5 Training Materials

The Realest Study Materials NCP-MCI-6.5 Dumps

NEW QUESTION # 16
Which storage policy value can be inherited from a cluster?

A. IO performance
B. QoS
C. Storage Container
D. Compression

Answer: D

Explanation:
The storage policy value that can be inherited from a cluster is Compression. In the Nutanix Multicloud Infrastructure (NCP-MCI) 6.5, compression is a storage optimization feature that can be configured at the cluster level and inherited by all the entities within the cluster. This feature helps in reducing the storage footprint by compressing the data before writing it to the disk. The other options like IO performance, Storage Container, and QoS are not inherited from the cluster. They are configured and managed separately for each entity as per the requirements.

NEW QUESTION # 17
CPU utilization climbs above 90% on several VMs. This causes performance degradation for a business-critical application.
How can alerts be configured to notify the administrator before VM CPU utilization hits 90%?

A. On the Health dashboard, locate the VM CPU Check and lower the alert threshold below 90%.
B. On a CVM, use ncli to set the VM CPU Check threshold for the critical VMs to a value below 90%.
C. On a CVM, configure a cron job to run the VM CPU Check more frequently and email the result.
D. On the Alerts dashboard, ensure that the VM CPU usage alert is not set to auto-resolve.

Answer: A

NEW QUESTION # 18
What is the default network bond setting for an AHV host configuration?

A. active-active
B. active-backup
C. balance-tcp
D. balance-slb

Answer: B

Explanation:
Explanation
https://next.nutanix.com/blog-40/network-load-balancing-with-acropolis-hypervisor-6463

NEW QUESTION # 19
An administrator needs to increase bandwidth available to the AHV host and to the CVM.
How should the administrator complete this task?

A. In Prism, update vs0 to change the configuration to Active-Active.
B. Use manage-ovs commands to update br0 change the configuration to Active-Active.
C. In Prism, create a vsl interface and add any remaining uplinks.
D. Use manage-ovs commands to create br1 and add any remaining uplinks

Answer: A

NEW QUESTION # 20
What is he recommended approach for a constrained VM?

A. Delete the VM.
B. Reboot the VM
C. Increase the VM resources.
D. Decrease the VM resources

Answer: C

NEW QUESTION # 21
An administrator needs to ensure logs, alerts and information is consistent across clusters that are located in different countries.
Which service needs to be configured?

A. NTP
B. SNMP
C. DNS
D. SMTP

Answer: A

Explanation:
NTP service needs to be configured to ensure logs, alerts and information is consistent across clusters that are located in different countries. NTP stands for Network Time Protocol and it is used to synchronize the clocks of all the nodes in a cluster1. This helps to maintain accurate timestamps for logs, alerts and other information that are generated by Nutanix clusters1.

NEW QUESTION # 22
An administrator is commissioning a Nutanix Enterprise Cloud. Once the user VMs have been deployed and are running, the administrator finds that VMs on the same host are able to communicate, but are unable to communicate between hosts.
What must be changed to enable full inter-VM communications?

A. Change the network the VMs are connected to
B. Change the spanning-tree port type on the switch.
C. Update the switch to specifically allow VLAN 15
D. The VMs need to have static IP addresses.

Answer: C

NEW QUESTION # 23
Refer to Exhibit:

An administrator is attempting to create an additional virtual switch on a newly deployed AHV cluster, using the two currently disconnected interfaces. The administrator is unable to select the disconnected interfaces when creating the virtual switch.
What is the likely cause of this issue?

A. Only one interface is available on the selected hosts.
B. Interfaces must be assigned to virtual switches via the cli
C. The disconnected interfaces are currently assigned to virtual switch 0,
D. Interfaces must be connected to the network before they can be assigned.

Answer: D

Explanation:
In Nutanix AHV, when creating a virtual switch and trying to add network interfaces (NICs) to it, the NICs must be connected to the network before they can be selected and assigned to the switch. If the interfaces are showing as disconnected, the system will not allow them to be added to a virtual switch because it cannot verify their operational status or the presence of a live network connection.
It is a standard requirement for the interfaces to have physical connectivity (i.e., network cables plugged in and connected to a live switch port) so that the AHV host can detect the link status as up. Once the interfaces are connected and recognized by the host, they can then be added to a virtual switch in the Nutanix AHV.
It's important to note that while the command-line interface (CLI) is indeed a powerful tool for managing network configurations on AHV hosts, and some configurations do indeed require CLI, the inability to select disconnected interfaces is not specifically a limitation that requires the use of CLI to overcome. The focus should be on ensuring that the physical connectivity is established for the interfaces in question.
This behavior is consistent with networking best practices and Nutanix's network configuration guidelines, as detailed in the Nutanix AHV Networking Guide. This guide explains the requirements and procedures for configuring virtual switches and managing NICs in a Nutanix AHV environment.

NEW QUESTION # 24
An administrator wants to create a trunked interface on a VM on AOS 5.15x.
Which two steps should the administrator take first to achieve this? (Choose two)

A. Log in over PE web UI.
B. Use acli
C. SSH to CVM.
D. Update VM dialog.

Answer: B,C

Explanation:
Explanation/Reference:
Reference:
#sthash.3uIAHeXZ.dpbs

NEW QUESTION # 25
Which two methods are available when migrating a VM from a legacy 3-tier solution using VMware ESXi to AHV? (Choose two.)

A. Use shared nothing live migration.
B. Import the .vmdk into the Image Service.
C. Deploy the Move appliance.
D. Use Cross-Hypervisor DR.

Answer: C,D

NEW QUESTION # 26
Refer to exhibit:

Why has an anomaly been triggered?

A. Controller reached 2500 IOPS.
B. Observed IOPS exceed normal values.
C. Observed values do not match predicted values.
D. Normal Controller behavior has increased.

Answer: B

NEW QUESTION # 27
An administrator is troubleshooting vDisk performance issues in a Nutanix cluster with hybrid disks. The VMs all have Flash Mode enabled.
But users are reporting disk latency.
What could cause the performance issues?

A. Compression is disabled on the vDisk storage container.
B. Flash mode is disabled when a node fails.
C. Data size for flash mode exceeds 25% of the SSD capacity.
D. The VMs vDisks are in multiple containers.

Answer: C

NEW QUESTION # 28
Refer to Exhibit:

An administrator is trying to create a custom alert policy for all VMs.
Why is the Alert warning if field greyed cut?

A. The Auto resolve alerts option is checked.
B. The Enable Policy option checked.
C. The Behavioral Anomaly threshold is set.
D. The Alert critical if threshold is set.

Answer: C

Explanation:
when you create a custom alert policy, you can choose between two types of thresholds: Static Threshold and Behavioral Anomaly. Static Threshold allows you to set a fixed value for the metric that triggers the alert.
Behavioral Anomaly allows you to use machine learning to detect abnormal behavior based on historical data.
If you select Behavioral Anomaly as the threshold type, you cannot set a warning level for the alert. You can only set a critical level that indicates how much deviation from normal behavior is considered an anomaly3.
Therefore, the Alert warning if field is greyed out when you select Behavioral Anomaly.

NEW QUESTION # 29
An administrator recently added new SSDs to a Nutanix cluster and knows the firmware will be out of date, Due to security constraints, the cluster does not have access to the Internet.
Which two steps must be completed to update the firmware? (Choose two.)

A. update the LCM Source and URL to access the firmware bundle.
B. Download the disk firmware from the OEM's website.
C. Select Upgrade Software, then upload the firmware bundle.
D. Download a darksite bundle and deploy an internal webserver,

Answer: C,D

Explanation:
Download a dark site bundle and deploy an internal web server123.
Select Upgrade Software, then upload the firmware bundle using the Direct Upload option in LCM1.

NEW QUESTION # 30
An administrator manages a cluster and notices several failed components shown in the exhibit.

What two options does the administrator have to run all NCC checks manually? (Choose two.)

A. Using the Actions drop-down menu in the Health dashboard of Prism Element.
B. Running noc health_checks run_all on the PC VM
C. Running ncc health_checks run-alll on the CVM
D. Using the action action drop-down menu in the Health dashboard of Prism Central

Answer: A,C

Explanation:
Prism Element and NCC are two ways to run all NCC checks manually on a Nutanix cluster. Prism Element is the web console that provides management and monitoring capabilities for a single Nutanix cluster. Prism Element has a Health dashboard that shows the status of various components and services in the cluster, such as disks, nodes, CVMs, NCC, and alerts. The Health dashboard also allows the administrator to run NCC checks manually by using the Actions drop-down menu on the right side of the screen. The administrator can choose to run all NCC checks or specific checks based on the category or severity. The NCC checks will run in the background and generate a report that can be viewed or downloaded from the Summary tab. This method is easier and faster than running NCC from the command line on the CVM.
NCC stands for Nutanix Cluster Check, which is a framework of scripts that performs system checks and validations on Nutanix clusters. NCC can detect issues related to hardware, software, configuration, hypervisor, networking, and more. NCC can be run from the command line interface (CLI) of any CVM in the cluster by using the ncc command. To run all NCC checks manually, theadministrator can use the command ncc health_checks run_all, which will execute all available checks and display the results on the screen. This method is more comprehensive and detailed than running NCC from Prism Element.
References: : [Health Dashboard - Prism Element Guide] : [Nutanix Cluster Check (NCC) - Nutanix Support
& Insights] : [Running NCC Checks - Nutanix Support & Insights]

NEW QUESTION # 31
Which component can be associated with a storage policy?

A. Catalog
B. Category
C. Vm
D. Subnet

Answer: C

Explanation:
A storage policy can be associated with a VM. A storage policy is a set of rules that define how data objects are stored and protected. It specifies the characteristics of storage, data protection, and data placement for virtual disks that are assigned to a VM. Subnets, catalogs, and categories are not associated with storage policies.https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-vpc_2022_6:mul-clust

NEW QUESTION # 32
Refer to Exhibit:

An administrator needs to enable inline deduplication for a pre-existing storage container. When trying to enable deduplication on the storage container. this feature is grayed-out.
What is the reason for this behavior?

A. The cluster has hybrid storage and deduplication is supported only on all-flash clusters.
B. Capacity reservation is not enabled on the storage container.
C. The cluster has less than 5 nodes which is the minimum node-count to enable deduplication.
D. Replication Factor 1 is configured on the storage container.

Answer: A

Explanation:
Nutanix supports two types of deduplication: post-process and inline. Post-process deduplication runs periodically on a schedule and can be enabled on any cluster. Inline deduplication runs in real time before data is written to disk and can be enabled only on all-flash clusters.
Therefore, by checking the type of storage and the type of deduplication, you can determine if you can enable inline deduplication on a storage container or not.
Nutanix inline deduplication is a feature that reduces the stored size and avoids duplicate data on a storage container1. It is recommended only on some specific scenarios, such as when using Nutanix Files or virtual desktop infrastructure (VDI) workloads12.

NEW QUESTION # 33
What is a requirement to enable Flow Neworking?

A. A dedicated virtual switch has been created for Flow Networking.
B. Flow Micro segmentation must be enabled.
C. Prims Central is using a three-node scale-out deployment
D. Microservices infrastructure must be enabled.

Answer: D

Explanation:
Flow Networking is a feature that enables software-defined networking for AHV clusters. It allows users to create and manage virtual private clouds (VPCs), subnets, and network services such as NAT, DHCP, routing, and VPN. Flow Networking also supports service insertion and chaining, which enables integration with third-party network functions such as firewalls and load balancers. Flow Networking is built on top of the microservices infrastructure (MSP) in Prism Central, which provides the platform for running various Nutanix services such as Calm, Karbon, and Objects. Therefore, to enable Flow Networking, the MSP must be enabled first on Prism Central1. The MSP can be enabled from the Prism Central settings page or from the command line interface (CLI) of the Prism Central VM2. Enabling the MSP will also enable Flow Microsegmentation, which is another feature that provides network security and visibility for AHV clusters.

NEW QUESTION # 34
What is the proper sequence to perform a one-click upgrade to a Nutanix cluster?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements. Not all procedures are valid. Identify any invalid procedures using the drop-down option.

Answer:

Explanation:

Explanation:
Step 1 ---> Login into Prism Element.
Step 2 ---> Select the Gear Icon at top right of the page.
Step 3 ---> Click Upgrade Software.
Step 4 ---> Select the component to upgrade.
Step 5 ---> Click download.
Step 6 ---> Once the download completes, select upgrade.
Invalid:-
1 - Select Prism Central.
2 - Select user login.
3 - On left select upgrade Prism Central.

NEW QUESTION # 35
A recently configured cluster is leveraging NearSync with a recovery schedule of 15 minutes. It is noticed that the cluster is consistently transitioning in an Out of NearSyne.
What action should be taken to potentially address this issue?

A. Configure a secondary schedule in the same Protection Domain.
B. Change the NearSync schedule to 30 minutes.
C. Add a vCPUs to the user VMs.
D. Increase network bandwidth

Answer: D

Explanation:
One of the possible reasons for a cluster to transition out of NearSync is insufficient network bandwidth between the source and target clusters. NearSync requires a minimum network bandwidth of 10 Mbps per VM for replication3. If the network bandwidth is lower than the required amount, the replication of recovery points may take longer than the configured RPO, resulting in an Out of NearSync condition. To address this issue, you can increase the network bandwidth between the clusters or reduce the number of VMs protected by NearSync4.

NEW QUESTION # 36
Which algorithm do snapshots and clones leverage to maximize efficiency and effectiveness?

A. Continuous Data Protection
B. Copy-on-Write
C. Split-mirror
D. Redirect-On-Write

Answer: B

Explanation:
According to the Dell Unity: Data Reduction Technical White Paper1, snapshots and clones on Dell Unity use the Copy-on-Write (CoW) algorithm to maximize efficiency and effectiveness. CoW is a technique that defers the copying of data until it is modified. This means that snapshots and clones only consume space when changes are made to the source or the clone, respectively. CoW also preserves the original data in case of a rollback or recovery operation.

NEW QUESTION # 37
An administrator needs to provide access for a user to view real-time performance metric for all VMs on all clusters across the datacenter.
Which method accomplishes this with the least effort and ongoing maintenance?

A. Configure AD authentication and assign the user to the Viewer role in Prism Element.
B. Configure IDP authentication and assign the user to the Cluster Admin role in Prism Central.
C. Configure AD authentication create a custom role, assign the user to the role, and apply the role to all clusters and VMs

Answer: C

Explanation:
The best method to provide access for a user to view real-time performance metrics for all VMs on all clusters across the datacenter is to configure AD authentication create a custom role, assign the user to the role, and apply the role to all clusters and VMs. This method accomplishes this with the least effort and ongoing maintenance because:
AD authentication allows Nutanix Prism Central to integrate with an existing Active Directory (AD) domain and use AD users and groups for authentication and authorization5. This simplifies user management and avoids creating local users on Prism Central.
Creating a custom role allows Nutanix Prism Central to define granular permissions for different actions and entities based on specific needs6. This ensures that users only have access to what they need and nothing more.
Assigning the user to the custom role allows Nutanix Prism Central to grant access rights for that user based on the role definition7. This avoids assigning permissions individually for each user.
Applying the role to all clusters and VMs allows Nutanix Prism Central to propagate the access rights for that role across all entities in scope8. This ensures that users can view real-time performance metrics for all VMs on all clusters without having to configure each entity separately.

NEW QUESTION # 38
An administrator has been asked to enable block awareness and increase the fault tolerance to FT2 on a Nutanix AHV cluster with the following configuration:
Four blocks
One node per block
Will the administrator be able to accomplish these tasks?

A. No-Fault tolerance changes are not supported.
B. Yes-FT2 requires a minimum of three nodes.
C. No-FT2 requires a minimum of five nodes.
D. Yes-Block awareness requires a minimum of three blocks.

Answer: C

NEW QUESTION # 39
An administrator needs to shut down an AHV cluster to relocate hardware. The administrator upgrades NCC and runs health checks.
Which steps should the administrator perform next?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements.