Get 100% Passing Success With True NSE7_EFW-6.4 Exam! [Sep-2021]
Fortinet NSE7_EFW-6.4 PDF Questions - Exceptional Practice To Fortinet NSE 7 - Enterprise Firewall 6.4
NEW QUESTION 38
Refer to the exhibit, which contains partial outputs from two routing debug commands.
Why is the port2 default route not in the second command's output?
- A. It has a higher distance than the default route using port1.
- B. It has a lowerpriority value than the default route using port1.
- C. It is disabled in the FortiGate configuration.
- D. It has a higher priority value than the default route using port1.
Answer: A
NEW QUESTION 39
View the global IPS configuration, and then answer the question below.
Which of the following statements is true regarding this configuration?
- A. FortiGate will spawn IPS engine instances based on the system load.
- B. New packets will be passed through without inspection if the IPS socket buffer runs out of memory.
- C. IPS will scan every byte in every session.
- D. IPS will use the faster matching algorithm which is only available for units with more than 4 GB memory.
Answer: C
NEW QUESTION 40
View the exhibit, which contains an entry in the session table, and then answer the question below.
Which one of the following statements is true regarding FortiGate's inspection of this session?
- A. FortiGate applied explicit proxy-based inspection.
- B. FortiGate forwarded this session without any inspection.
- C. FortiGate applied flow-based inspection.
- D. FortiGate applied proxy-based inspection.
Answer: D
Explanation:
Explanation
https://kb.fortinet.com/kb/viewContent.do?externalId=FD30042
NEW QUESTION 41
View the IPS exit log, and then answer the question below.
# diagnose test application ipsmonitor 3
ipsengine exit log"
pid = 93 (cfg), duration = 5605322 (s) at Wed Apr19 09:57:26 2017
code = 11, reason: manual
What is the status of IPS on this FortiGate?
- A. IPS engine memory consumption has exceeded the model-specific predefined value.
- B. There are communication problems between theIPS engine and the management database.
- C. IPS daemon experienced a crash.
- D. All IPS-related features have been disabled in FortiGate's configuration.
Answer: D
Explanation:
Explanation
The command diagnose test application ipsmonitor includes many options that are useful for troubleshooting purposes.Option 3 displays the log entries generated every time an IPS engine process stopped. There are various reasons why these logs are generated:Manual: Because of the configuration, IPS no longer needs to run (that is, all IPS-releated features have been disabled)
NEW QUESTION 42
Which of the following conditions must be met fora static route to be active in the routing table? (Choose three.)
- A. There is no other route, to the same destination, with a higher distance.
- B. The next-hop IP address belongs to one of the outgoing interface subnets.
- C. The outgoing interface is up.
- D. The link health monitor (if configured) is up.
- E. The next-hop IP address is up.
Answer: B,C,D
Explanation:
Explanation
A configured static route only goes to routing table from routing database when all the following are met :
* The outgoing interface is up
* There isno other matching route with a lower distance
* The link health monitor (if configured) is successful
* The next-hop IP address belongs to one of the outgoing interface subnets
NEW QUESTION 43
View the exhibit, which contains the output of a diagnose command, and then answer the question below.
What statements are correct regarding the output? (Choose two.)
- A. Traffic in the original direction (coming from the IP address 10.171.122.38) will be routed to the next-hop IP address 10.200.1.1.
- B. This is anexpected session created by a session helper.
- C. Traffic in the original direction (coming from the IP address 10.171.122.38) will be routed to the next-hop IP address 10.0.1.10.
- D. This is an expected session created by an application control profile.
Answer: A,B
NEW QUESTION 44
View the exhibit, which contains a screenshot of some phase-1settings, and then answer the question below.
The VPN is up, and DPD packets are being exchanged between both IPsec gateways; however, traffic cannot pass through the tunnel. To diagnose, the administrator enters these CLI commands:
However, the IKE real time debug does not show any output. Why?
- A. The debug output shows phase 1 negotiation only. After that, the administrator must enable the following real time debug: diagnose debug application ipsec -1.
- B. The debug shows only error messages. If there is no output, then the tunnel is operating normally.
- C. The log-filter setting was set incorrectly. The VPN's traffic does not match thisfilter.
- D. The debug output shows phases 1 and 2 negotiations only. Once the tunnel is up, it does not show any more output.
Answer: C
NEW QUESTION 45
An administrator has configured a FortiGate device with two VDOMs: root and internal. The administrator has also created and inter-VDOM link that connects both VDOMs. The objective is to have each VDOM advertise some routes to the other VDOM via OSPF through the inter-VDOM link. What OSPF configuration settings must match in both VDOMs to have the OSPF adjacency successfully forming? (Choose three.)
- A. OSPF interface cost.
- B. OSPF interface area.
- C. OSPF interface MTU.
- D. Interface subnet mask.
- E. Router ID.
Answer: B,C,D
NEW QUESTION 46
View the exhibit, which contains theoutput of get sys ha status, and then answer the question below.
Which statements are correct regarding the output? (Choose two.)
- A. Master is selected because it is the only device in the cluster.
- B. The slave configuration is not synchronized with the master.
- C. port 7 is used the HA heartbeat on all devices in the cluster.
- D. The HA management IP is 169.254.0.2.
Answer: B,C
NEW QUESTION 47
Refer to exhibit, which contains the output of a BGP debug command.
Which statement explains why the state of the 10.200.3.1 peer is Connect?
- A. The TCP session to 10.200.3.1 has not completed the 3-way handshake.
- B. The local router has received the BGP prefixes from the remote peer.
- C. The local router is receiving BGP keepalives from theremote peer, but the local peer has not received the OpenConfirm yet.
- D. The local router is receiving the BGP keepalives from the peer, but it has not received a BGP prefix yet.
Answer: A
Explanation:
Explanation
BGP neighbor states and how they change:* Idle: Initial state* Connect: Waiting for a successful three-way TCP connection* Active: Unable to establish the TCP session* OpenSent: Waiting for an OPEN message from the peer* OpenConfirm: Waiting for the keepalive message from the peer* Established: Peers have successfully exchanged OPEN and keepalive messages
NEW QUESTION 48
View the exhibit, which contains the partial output of an IKE real-time debug, and then answer the question below.
Why didn't the tunnel come up?
- A. The remote gateway's phase 2configuration does not match the local gateway's phase 2 configuration.
- B. The remote gateway's phase 1 configuration does not match the local gateway's phase 1 configuration.
- C. The remote gateway is using aggressive mode and the local gateway is configured to use man mode.
- D. The pre-shared keys do not match.
Answer: B
NEW QUESTION 49
An administrator cannot connect to the GIU of a FortiGate unit with the IP address 10.0.1.254. The administrator runs thedebug flow while attempting the connection using HTTP. The output of the debug flow is shown in the exhibit:
Based on the error displayed by the debug flow, which are valid reasons for this problem? (Choose two.)
- A. HTTP administrative access is disabled in the FortiGate interface with the IP address 10.0.1.254.
- B. HTTP administrative access is configured with a port number different than 80.
- C. The packet is denied because of reverse path forwarding check.
- D. Redirection of HTTP to HTTPS administrative access is disabled.
Answer: A,B
NEW QUESTION 50
Which statement is true regarding File description (FD) conserve mode?
- A. A FortiGate enters FD conserve mode when the amount of available description is less than 5%.
- B. Restarting the WAD process is required to leave FD conserve mode.
- C. FD conserve mode affects all daemons running on the device.
- D. IPS inspection is affected when FortiGate enters FD conserve mode.
Answer: A
NEW QUESTION 51
What is the diagnose test application ipsmonitor 99 command used for?
- A. To disable the IPS engine
- B. To provide information regarding IPS sessions
- C. To enable IPS bypass mode
- D. To restart all IPS engines and monitors
Answer: D
NEW QUESTION 52
View the exhibit, which contains the output of a BGP debug command, and then answer the question below.
Which ofthe following statements about the exhibit are true? (Choose two.)
- A. The local router has not established a TCP session with 100.64.3.1.
- B. The local router's BGP state is Established with the 10.125.0.60 peer.
- C. Since the counters were last reset; the 10.200.3.1 peer has never been down.
- D. The local router has received atotal of three BGP prefixes from all peers.
Answer: A,B
NEW QUESTION 53
The logs in a FSSO collector agent (CA) are showing the following error:
failed to connect to registry: PIKA1026 (192.168.12.232)
What can be the reason for this error?
- A. The remote registry service is not running in the workstation 192.168.12.232.
- B. The CA cannot reach the FortiGate with the IP address192.168.12.232.
- C. The FortiGate cannot resolve the name of the workstation.
- D. The CA cannot resolve the name of the workstation.
Answer: A
Explanation:
Explanation
https://kb.fortinet.com/kb/documentLink.do?externalID=FD30548
NEW QUESTION 54
What does the dirty flag mean in aFortiGate session?
- A. Traffic has been blocked by the antivirus inspection.
- B. The next packet must be re-evaluated against the firewall policies.
- C. The session must be removed from the former primary unit after an HA failover.
- D. Traffic has been identified as from an application that is not allowed.
Answer: B
Explanation:
Explanation
https://kb.fortinet.com/kb/viewContent.do?externalId=FD40119&sliceId=1
NEW QUESTION 55
View the exhibit, which contains the output of a diagnose command, and then answer the question below.
Which statements are true regarding the output in the exhibit? (Choose two.)
- A. FortiGate will probe 121.111.236.179 every fifteen minutes for a response.
- B. Servers with the D flag are considered to be down.
- C. Servers with a negative TZ value are experiencing a service outage.
- D. FortiGate used 209.222.147.3 as the initial server to validate its contract.
Answer: A,D
Explanation:
Explanation
A - because flag is Failed so fortigate will check if server is available every 15 minD-state is I , contact to validate contract info
NEW QUESTION 56
Which of the following statements are true regardingthe SIP session helper and the SIP application layer gateway (ALG)? (Choose three.)
- A. SIP ALG supports SIP HA failover; SIP helper does not.
- B. SIP ALG can create expected sessions for media traffic; SIP helper does not.
- C. SIP session helper runs in the kernel; SIP ALG runs as a user space process.
- D. SIP helper supports SIP over TCP and UDP; SIP ALG supports only SIP over UDP.
- E. SIP ALG supports SIP over IPv6; SIP helper does not.
Answer: A,B,E
NEW QUESTION 57
How does FortiManager handle FortiGuard requests from FortiGate devices, when it is configured as a local FDS?
- A. FortiManager can download and maintain local copies of FortiGuard databases.
- B. FortiManager will respond to update requests only if they originate from a managed device.
- C. FortiManager supports only FortiGuard push to managed devices.
- D. FortiManager does not support rating requests.
Answer: A
NEW QUESTION 58
......
NSE7_EFW-6.4 dumps - Actual4dump - 100% Passing Guarantee: https://www.actual4dump.com/Fortinet/NSE7_EFW-6.4-actualtests-dumps.html
Fast, Hands-On NSE7_EFW-6.4 exam: https://drive.google.com/open?id=1wC7KJJwQQtZjqyFo_S-n9AImrUKZVwsm