[Sep-2023] 1Y0-231 Questions - Truly Beneficial For Your Citrix Exam
Download Citrix 1Y0-231 Sample Questions
NEW QUESTION # 34
Scenario:A Citrix Administrator configures an access control list (ACL) to block traffic from the IP address
10.102.29.5:
add simpleacl rule1 DENY -srcIP 10.102.29.5
A week later, the administrator discovers that the ACL is no longer present on the Citrix ADC.
What could be the reason for this?
- A. The simple ACLs remain active for only 60 seconds.
- B. The Citrix ADC has been restarted without saving the configurations.
- C. The simple ACLs remain active for only 600 seconds.
- D. The administrator did NOT run the apply ACL command.
Answer: D
NEW QUESTION # 35
Scenario: A Citrix Administrator made changes to a Citrix ADC, deleting parts of the configuration and saving some new ones. The changes caused an outage that needs to be resolved as quickly as possible. There is no Citrix ADC backup.
What does the administrator need to do to recover the configuration quickly?
- A. Restart the Citrix ADC.
- B. Run saved versus running configuration.
- C. Run high availability (HA) file synchronization.
- D. Restore from the revision history.
Answer: D
NEW QUESTION # 36
A Citrix Administrator needs to configure a Citrix Gateway virtual server to meet an organization's security requirements.
Which two types of devices can the administrator control with Endpoint Analysis (EPA) scans? (Choose two.)
- A. Mac
- B. Chromebook
- C. iOS
- D. Android
- E. Microsoft Windows
Answer: A,E
NEW QUESTION # 37
Scenario: To meet the security requirements of the organization, a Citrix Administrator needs to configure a Citrix Gateway virtual server with time-outs for user sessions triggered by the behaviors below:
* Inactivity for at least 15 minutes.
* No keyboard or mouse activity for at least 15 minutes
Which set of time-out settings can the administrator configure to meet the requirements?
- A. Client idle time-out and forced time-out set to 900
- B. Session time-out and client idle time-out set to 15
- C. Client idle time-out and forced time-out set to 15
- D. Session time-out and forced time-out set to 15
Answer: B
NEW QUESTION # 38
Scenario: A Citrix Administrator needs to create local, limited-privilege user accounts for other administrators.
The other administrators will require only:
* The ability to enable and disable services and servers
* Read-only access
Which built-in command policy permission level can the administrator use?
- A. Network
- B. Sysadmin
- C. Read-only
- D. Operator
Answer: D
NEW QUESTION # 39
Which Citrix ADC service monitor can a Citrix Administrator use to test the three-way handshake between the Citrix ADC and the backend server?
- A. UDP
- B. TCP
- C. LDAP
- D. PING
Answer: B
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/citrix-adc/current-release/load-balancing/load-balancing-builtin- monitors/monitor-tcp.html
NEW QUESTION # 40
A Citrix ADC is connected with one network interface to the client network and another to the server network, ensuring that all traffic flows through the appliance.
Which type of deployment is this?
- A. Bridge mode
- B. One-arm
- C. Two-arm
- D. Direct server return
Answer: C
NEW QUESTION # 41
Scenario: A Citrix Administrator configured a new router that requires some incoming and outgoing traffic to take different paths through it. The administrator notices that this is failing and runs a network trace. After a short monitoring period, the administrator notices that the packets are still NOT getting to the new router from the Citrix ADC.
Which mode should the administrator disable on the Citrix ADC to facilitate the successful routing of the packets?
- A. USIP
- B. Layer3
- C. USNIP
- D. MAC-based forwarding (MBF)
Answer: D
NEW QUESTION # 42
A Citrix Administrator needs to configure a Citrix ADC high availability (HA) pair with each Citrix ADC in a different subnet.
What does the administrator need to do for HA to work in different subnets?
- A. Turn on Independent Network Configuration (INC) mode
- B. Configure SyncVLAN
- C. Turn on fail-safe mode
- D. Turn on HA monitoring on all Interfaces
Answer: A
NEW QUESTION # 43
Scenario: A Citrix ADC MPX is using one of four available 10G ports. A Citrix Administrator discovers a traffic bottleneck at the Citrix ADC.
What can the administrator do to increase bandwidth on the Citrix ADC?
- A. Add another 10G Citrix ADC port to the switch, and configure link aggregation control protocol (LACP).
- B. Plug another 10G Citrix ADC port into the router.
- C. Purchase another Citrix ADC MPX appliance.
- D. Add two more 10G Citrix ADC ports to the network and configure VLAN.
Answer: A
NEW QUESTION # 44
Scenario: While performing a disaster recovery test, a Citrix Administrator decides to failover the Citrix ADC high availability (HA) pair appliances. The administrator notices that the failover is NOT working as expected, and the secondary Citrix ADC is NOT taking over as primary. The administrator suspects that networking issues may be causing the failure.
What could be the cause of this issue?
- A. HA heartbeats are only seen on some enabled interfaces of the secondary node.
- B. The Independent Network Configuration (INC) mode is enabled on the primary node.
- C. HA monitoring is enabled on an interface of the secondary node that shows as ENABLED, DOWN.
- D. HA monitoring is enabled on a disabled interface of the primary node.
Answer: C
NEW QUESTION # 45
A Citrix Administrator needs to integrate an existing certification-based authentication policy into an existing Citrix Gateway virtual server.
Which three steps can the administrator take to accomplish this? (Choose three.)
- A. Enable client authentication on the SSL parameters of the virtual server.
- B. Bind the existing CERT authentication policy to the Citrix Gateway virtual server.
- C. Create a CERT authentication policy and bind it to the Citrix Gateway virtual server.
- D. Enable the two-factor option on the existing CERT authentication profile.
- E. Change the client certificate to mandatory on the SSL parameters of the virtual server.
Answer: A,C,E
Explanation:
Reference:
cert-authentication/ng-client-cert-vserver-and-bind-tsk.html
NEW QUESTION # 46
Which set of items can a Citrix Administrator change when configuring a portal theme for users?
- A. Logo, background, labels
- B. Logo, background, browser requirements
- C. Font color, labels, URL displayed
- D. Browser requirements, logo, labels
Answer: A
Explanation:
Explanation/Reference:
Reference: https://support.citrix.com/article/CTX205486
NEW QUESTION # 47
A Citrix Administrator deploys a new Citrix ADC MPX appliance in the demilitarized zone (DMZ), with one interface in the DMZ and the other on the internal network.
In which mode should the administrator deploy the Citrix ADC?
- A. Forward proxy
- B. Transparent
- C. Two-arm
- D. One-arm
Answer: A
NEW QUESTION # 48
A Citrix Administrator configured a Citrix Gateway virtual server for authentication, but there is no authentication policy bound to the virtual server.
Which authentication binding point will the Citrix ADC evaluate next?
- A. User
- B. Group
- C. Override global
- D. Default global
Answer: A
NEW QUESTION # 49
Scenario: A Citrix Administrator needs to integrate LDAP for Citrix ADC system administration using current Active Directory (AD) groups. The administrator created the group on the Citrix ADC, exactly matching the group name in LDAP.
What can the administrator bind to specify the permission level and complete the LDAP configuration?
- A. An authentication, authorization, and auditing (AAA) action to the group
- B. A command policy to the group
- C. Users to the group on the Citrix ADC
- D. A nested group to the new group
Answer: B
NEW QUESTION # 50
If a user device does NOT comply with a company's security requirements, which type of policy can a Citrix Administrator apply to a Citrix Gateway virtual server to limit access to Citrix Virtual Apps and Desktops resources?
- A. Traffic
- B. Session
- C. Responder
- D. Authorization
Answer: B
Explanation:
Explanation/Reference: https://www.citrix.com/content/dam/citrix/en_us/documents/products-solutions/creating-and- enforcing-advanced-access-policies-with-xenapp.pdf
NEW QUESTION # 51
Scenario: A Citrix Administrator needs to configure an authentication workflow on Citrix ADC with the below requirements.
All internal users must use their corporate credentials to authenticate.
Users from partner organizations must be authenticated using their own directory services without replication or a synchronization process.
How can the administrator meet the above requirements while authenticating the users?
- A. Configure nFactor authentication with two LDAP advanced policies and one SAML advanced policy.
- B. Create two LDAP and two SAML authentication policies on the authentication, authorization, and auditing (AAA) virtual server.
- C. Configure two dedicated AAA virtual servers for internal and partner users.
- D. Deploy SAML on Citrix ADC in the service provider (SP) role for users from partner organizations.
Answer: A
NEW QUESTION # 52
Which four steps should a Citrix Administrator take to configure SmartAccess? (Choose four.)
- A. Ensure that the SmartAccess filter name on the Delivery Group matches the name of the Citrix Gateway policy.
- B. Ensure that the Callback URL is defined in the Citrix Gateway configuration within Store Front.
- C. Enable Citrix Workspace control within StoreFront.
- D. Execute "set-BrokerSite -TrustRequestsSentToTheXMLServicePort $True" on any Citrix Delivery Controller in the Site.
- E. Ensure that the SmartAccess filter name on the Delivery Group matches the name of the Citrix Gateway virtual server.
- F. Ensure that ICA Only is checked on the Citrix Gateway virtual server.
- G. Ensure that ICA Only is unchecked on the Citrix Gateway virtual server.
Answer: B,D,E,G
NEW QUESTION # 53
Which scenario will cause automatic high availability (HA) synchronization to fail?
- A. A configuration change to the primary Citrix ADC
- B. A forced failover
- C. Manually forced synchronization
- D. Different build versions
Answer: C
NEW QUESTION # 54
What is one reason a Citrix Administrator should configure the AlwaysON VPN feature?
- A. Management wants to regulate the network access provided to its users when they are connected to a VPN tunnel.
- B. An employee needs to have client choices after logging on outside the enterprise network.
- C. Management wants web traffic to go out locally instead of across the VPN.
- D. An employee starts the laptop outside the enterprise network and needs assistance to establish VPN connectivity.
Answer: A
NEW QUESTION # 55
Which scenario will cause automatic high availability (HA) synchronization to fail?
- A. A configuration change to the primary Citrix ADC
- B. A forced failover
- C. Manually forced synchronization
- D. Different build versions
Answer: C
Explanation:
Explanation/Reference: https://support.citrix.com/article/CTX124439
NEW QUESTION # 56
......
Truly Beneficial For Your Citrix Exam: https://www.actual4dump.com/Citrix/1Y0-231-actualtests-dumps.html
Real 1Y0-231 Exam Questions and Answers FREE: https://drive.google.com/open?id=149LFHYlEBnFkdWvpnv7Ix3JJxHmZ9uRj